H&P Drilling Careers USA & Canada 2026 – Apply Online

Are you searching for H&P Drilling Careers USA Canada in 2026? Helmerich & Payne (H&P) continues to recruit workers for drilling operations, rig-based positions, electrical and mechanical work, well control, technology, engineering, and other professional roles.

H&P’s official recruitment system currently lists U.S. rig-based opportunities in locations including Texas, Oklahoma, Colorado, North Dakota and Ohio. The company also publishes specialist positions such as Rig Electrician and Well Control Technician. Current vacancies and locations can change, so applicants should always check the official job listing before applying.

For Canada, applicants should use H&P’s official careers portal to search for positions specifically located in Canada. Job availability, requirements, compensation and work authorization can differ between countries and individual vacancies.

About H&P Drilling

Helmerich & Payne is an established drilling contractor that has been operating since 1920. The company focuses on drilling productivity, reliability, rig technology and drilling solutions for the energy industry.

H&P employs people across different areas of the drilling business. Field-based employees can work directly on drilling rigs, while mechanics, electricians, well-control specialists, engineers and technology professionals provide important technical support.

The company also highlights employee training and development. Its recruitment information shows opportunities across technical, professional, rig-based and leadership areas.

For job seekers, this means H&P careers are not limited to one type of oilfield position. Applicants can search according to their experience, trade qualification and career background.

H&P Drilling Careers USA Canada

H&P’s U.S. rig-based recruitment listing identifies several non-supervisory drilling positions. These include Floorhand, Roustabout, Motorman and Derrickman. The company also advertises specialist positions such as Rig Electrician and Well Control Technician.

Here is an overview of the main job categories:

Job Position	Career Area	Experience / Entry Information
Floorhand	Rig Operations	Entry-level position available in H&P’s rig-based listing
Roustabout	Rig Support	Entry-level offshore category is identified in the listing
Motorman	Mechanical	Mechanical equipment experience preferred
Derrickman	Drilling Operations	Non-entry-level drilling experience may be required
Rig Electrician	Electrical	3–5 years electrical/electronic controls experience
Well Control Technician	Well Control	High school diploma/GED and 1–3 years relevant experience listed
Rig Mechanic	Maintenance	Check the current vacancy for exact requirements
Engineering & Technology	Professional	Requirements depend on the individual position

These are job categories based on H&P’s published recruitment information. They should not be interpreted as a guarantee that every position is currently available in both the USA and Canada.

H&P Floorhand Jobs USA

Floorhand is one of the most relevant H&P opportunities for people looking to enter rig-based drilling operations.

H&P describes Floorhand as an entry-level rig-based position. Duties can include assisting with rig-up and rig-down activities, general equipment operation, repairs and maintenance on rig components, activities on the rig floor, mud mixing and handling tubulars in the derrick.

The company currently lists area-specific Floorhand opportunities, including a North Dakota position based in Dickinson. The North Dakota listing describes the role as an entry-level rig-based position.

Applicants should be prepared for physical fieldwork and must meet the employer’s requirements.

H&P North Dakota Floorhand Jobs

H&P’s North Dakota Area Floorhand listing is based in Dickinson, North Dakota.

The published position describes a schedule of approximately 14 days on and 14 days off, with 12-hour workdays. The listing states that applicants must be at least 18 years old, pass a post-offer physical examination and have legal authorization to work in the country where the rig operates. Basic English and computer skills are also listed.

The published salary information for this specific North Dakota Floorhand listing states that pay starts at $80,000 annually, paid hourly with guaranteed overtime, full benefits and 401(k) matching.

Because this figure belongs to the specific North Dakota Floorhand listing, applicants should not use it as a general salary for every H&P position.

H&P Rig Electrician Careers

H&P also recruits Rig Electricians for its drilling operations.

The official Rig Electrician listing identifies locations including Odessa, Texas; Tyler, Texas; Oklahoma City, Oklahoma; Grand Junction, Colorado; Dickinson, North Dakota; and Barnesville, Ohio. The position is full-time and onsite.

The primary responsibility described by H&P is planning layouts, installing and repairing wires, electrical fixtures and rig control equipment.

The current listing requires three to five years of prior electrical or electronic controls experience related to servicing drilling machinery and equipment. Applicants must also be at least 18 years old, pass a post-offer physical examination and have proper legal authorization to work where the rig operates.

H&P lists a compensation guideline of $25.00–$34.50 per hour for this position. The company specifically explains that this is a good-faith estimate under Colorado pay-transparency requirements and may not apply when the position is outside Colorado.

H&P Rig-Based Drilling Jobs

H&P’s general U.S. rig-based listing covers non-supervisory positions including Floorman, Roustabout, Motorman and Derrickman.

The company states that these employees perform different manual and operational tasks throughout the rig site. Duties can include rig-up and rig-down work, equipment operation, repairs and maintenance, rig-floor activities, mud mixing and tubular handling.

The general listing says that non-entry-level positions require at least six months of previous drilling experience and knowledge of procedures associated with drilling a well. It also states that previous mechanical equipment experience is preferred for Motorman positions.

This makes it important for experienced oilfield workers to select positions that correspond to their previous rig experience.

H&P Well Control Technician Jobs

Well Control Technician is another technical opportunity listed by H&P.

The official listing covers locations including Odessa, Texas; Barnesville, Ohio; Grand Junction, Colorado; Dickinson, North Dakota; and Oklahoma City, Oklahoma.

The published requirements include a high school diploma or GED and one to three years of well-control or BOP/drilling rig experience.

The listing also provides a compensation guideline of $25.00–$34.50 per hour, with the same qualification that the published range is connected to Colorado pay-transparency requirements and may not apply to positions outside Colorado.

Applicants should read the complete vacancy before applying because technical drilling positions can have additional job-specific requirements.

H&P Drilling Salary 2026

H&P salaries depend on the position, location, experience and employment terms. It is therefore better to use salary information from individual official vacancies rather than publish an estimated company-wide salary.

Some current official listings provide compensation information.

H&P Position	Published Pay Information
North Dakota Area Floorhand	Starting at $80,000 annually
U.S. Rig-Based Positions	$25.00–$34.50/hour guideline
Rig Electrician	$25.00–$34.50/hour guideline
Well Control Technician	$25.00–$34.50/hour guideline

The $25.00–$34.50 hourly figure is not a universal H&P salary. H&P states that it is a good-faith hiring compensation estimate associated with Colorado pay-transparency requirements and that actual compensation can vary based on location, experience, performance and other factors.

The North Dakota Floorhand listing separately states that pay starts at $80,000 annually with guaranteed overtime, full benefits and 401(k) matching.

H&P Employee Benefits

H&P’s official job listings describe benefits available to eligible employees.

These can include:

Medical insurance
Dental insurance
Vision insurance
Life insurance
Flexible Spending Accounts or Health Savings Accounts
401(k) matching
Paid leave plans
Parental and adoption benefits
Disability coverage
Employee assistance programs
Educational assistance
Learning and development opportunities

Benefits are subject to eligibility and the applicable employment plan. Applicants should review the individual vacancy and employment documents for complete details.

H&P Drilling Work Schedule

Rig-based employment can involve extended work periods followed by scheduled time away from the rig.

H&P’s general U.S. rig-based listing states that assignments are generally 12 hours per day for 14–28 consecutive days, followed by 14–28 days off.

The North Dakota Floorhand listing specifies a 14-days-on and 14-days-off schedule with 12-hour workdays.

Schedules can differ between positions and operating areas, so candidates should always confirm the schedule in the specific vacancy.

Requirements for H&P Drilling Jobs

Requirements depend on the job.

For H&P’s general U.S. rig-based positions, the published requirements include:

Minimum age of 18
Post-offer physical examination
Legal authorization to work in the country where the rig operates
Basic English skills
Basic computer skills
Ability to follow written or oral instructions
At least six months of drilling experience for non-entry-level positions
Mechanical equipment experience preferred for Motorman positions

Specialist positions have additional requirements.

For example, H&P’s Rig Electrician listing requires three to five years of electrical or electronic controls experience.

The Well Control Technician listing requires a high school diploma or GED and one to three years of well-control or BOP/drilling rig experience.

H&P Drilling Jobs in Canada

Job seekers interested in H&P Drilling Careers Canada should use the company’s official careers portal and search specifically for Canadian vacancies.

Do not assume that requirements or salary information from a U.S. vacancy automatically apply to Canada. Employment laws, work authorization, compensation and job requirements can differ by country.

Candidates should select the Canadian location shown in the official vacancy and read the complete description before applying.

How to Apply for H&P Drilling Careers USA Canada

Applying through the official H&P recruitment system is straightforward.

Step 1: Visit the Official H&P Careers Page

Open the company’s careers website and search the available vacancies.

Step 2: Search for Your Position

Use keywords such as:

Floorhand
Roustabout
Motorman
Derrickman
Rig Electrician
Well Control Technician
Rig Mechanic
Drilling
Engineering

Step 3: Check the Location

Make sure the position is actually located in the USA or Canada according to your preference.

Step 4: Read the Requirements

Review experience, education, work authorization, physical requirements, schedule and any other conditions.

Step 5: Prepare Your Resume

Your resume should accurately include:

Work experience
Drilling experience
Technical skills
Education
Relevant certifications
Contact information

Step 6: Submit the Application

Complete the official online application and upload the requested documents.

Step 7: Monitor Your Application

Keep your application information and check your email for official communication from H&P.

Official H&P Application Links

H&P Careers:
Official H&P Careers

U.S. Rig-Based Positions:
H&P U.S. Rig-Based Positions

Rig Electrician:
H&P Rig Electrician Jobs

Well Control Technician:
H&P Well Control Technician

Important Information for Applicants

Applicants should apply through official H&P recruitment channels. Do not pay anyone for a guaranteed H&P job.

Job seekers should also verify the work authorization requirements for the country where they are applying. Having drilling experience does not automatically provide permission to work in the United States or Canada.

Salary information should also be checked against the individual vacancy because compensation can vary by position and location.

Frequently Asked Questions

1. What is H&P Drilling?

H&P, or Helmerich & Payne, is a drilling contractor providing drilling services and technology for the energy industry.

2. Are H&P drilling jobs available in the USA?

Yes. H&P’s official recruitment system currently lists U.S. rig-based positions and specialist drilling-related vacancies.

3. Does H&P offer entry-level drilling jobs?

Yes. H&P identifies Floorhand as an entry-level rig-based position in its U.S. recruitment listing.

4. How much does an H&P Floorhand earn?

The current North Dakota Area Floorhand listing states that pay starts at $80,000 annually, with hourly pay, guaranteed overtime, full benefits and 401(k) matching.

5. Does H&P hire Rig Electricians?

Yes. H&P has an official Rig Electrician vacancy covering several U.S. locations.

6. How much experience does a Rig Electrician need?

The current H&P Rig Electrician listing requires three to five years of prior electrical or electronic controls experience.

7. Does H&P hire Well Control Technicians?

Yes. H&P currently has a Well Control Technician listing covering several U.S. locations.

8. What experience is required for Well Control Technician jobs?

The official listing specifies a high school diploma or GED and one to three years of well-control or BOP/drilling rig experience.

9. Can international applicants apply for H&P jobs?

Applicants must meet the applicable legal work-authorization requirements. The individual vacancy should be checked for any specific conditions.

10. Where can I apply for H&P Drilling Careers USA Canada?

Applications should be submitted through H&P’s official careers website and its official job listings.

Final Words

H&P Drilling Careers USA Canada 2026 includes opportunities across rig operations, maintenance, electrical systems, well control and other technical areas. Current official listings show opportunities in several U.S. locations, while candidates interested in Canada should search the official careers portal for Canadian vacancies.

If you have drilling, mechanical, electrical, well-control or related experience, compare your background with the requirements of each vacancy before applying.

Apply through the official H&P careers portal:
H&P Careers – Apply Online